Tomrommel1's Vietnam War project
+13
Deadhead
Paul@ Empress
yankee sam
Richard MARQUIS
thomastmcc
Persel69
hayeswauford
Garryowen
BravoSix
FlyinSquirrel
OTB
Darby
Tomrommel1
17 posters
Page 9 of 15
Page 9 of 15 • 1 ... 6 ... 8, 9, 10 ... 15
Re: Tomrommel1's Vietnam War project
Thanks Sam , hope you had a wonderful time too.
This is a figure of a snake catcher. Figure by Full Metal Miniatures. He is carrying a Y staff for catching the snakes and a basket with lid for disposing the caught snakes.
More at https://wargamesgazette.com/2021/01/11/the-snake-catcher/
This is a figure of a snake catcher. Figure by Full Metal Miniatures. He is carrying a Y staff for catching the snakes and a basket with lid for disposing the caught snakes.
More at https://wargamesgazette.com/2021/01/11/the-snake-catcher/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
Here is the next Full Metal Miniature. A woman with a baby.
More at https://wargamesgazette.com/2021/01/12/mother-with-baby/
More at https://wargamesgazette.com/2021/01/12/mother-with-baby/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
If you build a city you need some groundwork to place it on. As my terrain tiles are all grassland and not suited for a build up environment. I started building thin overlays as ground for the city/village. I will build streets running over the rest of the terrain in a similar way later. I uses PVC sign makers tiles for this.As the tiles are very thin( but not warping) you can take them with you to other locations quite easily. As you can see on the picture. The setup is on our dining room table and not on my usual gaming table in the basement. This could be a nice lockdown project as you get everything you need on the net.
More at https://wargamesgazette.com/2021/01/13/the-streets-for-hue/
More at https://wargamesgazette.com/2021/01/13/the-streets-for-hue/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
Another civilian Miniature by Full Metal Miniatures. This time a porter carrying firewood. Painted as usual with GW contrast paints.
More at https://wargamesgazette.com/2021/01/14/collecting-firewood/
More at https://wargamesgazette.com/2021/01/14/collecting-firewood/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
FlyinSquirrel- Legacy Member
- Location : Fort Worth, Texas
Posts : 901
Join date : 2020-05-03
Age : 53
Re: Tomrommel1's Vietnam War project
Thanks!
Here are all the people living in my Vietnam war era village. I finished the last Full Metal Miniature yesterday.
More at https://wargamesgazette.com/2021/01/15/the-villagers/
Here are all the people living in my Vietnam war era village. I finished the last Full Metal Miniature yesterday.
More at https://wargamesgazette.com/2021/01/15/the-villagers/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
A Vietnamese village well:
A 3D print
More at https://wargamesgazette.com/2021/01/18/the-village-well/
A 3D print
More at https://wargamesgazette.com/2021/01/18/the-village-well/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
That turned out really well. 3D printer gets tempting from time to time...
-Rod
FlyinSquirrel- Legacy Member
- Location : Fort Worth, Texas
Posts : 901
Join date : 2020-05-03
Age : 53
Re: Tomrommel1's Vietnam War project
indeed it does
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
I wanted to add some things to give the buildings of my Vietnam war village and city a more lived in look. So I started with some pots were Rice or salted fish or firearms? can be stored in.
I used wooden beads for these.
More at https://wargamesgazette.com/2021/01/20/pottery-for-my-vietnam-table/
I used wooden beads for these.
More at https://wargamesgazette.com/2021/01/20/pottery-for-my-vietnam-table/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
I printed some walls with a short rest of FDM filament I had lying around. Walls like these can be used in between buildings or around parks and along streets. They are not only useful for my city of Hue project. So here they are:
and in action:
Many more pictures here: https://wargamesgazette.com/2021/01/22/walls/
and in action:
Many more pictures here: https://wargamesgazette.com/2021/01/22/walls/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
Thanks Bravo six !
Here is the next building for my Hue city project. Another 3D printed building from WOW buildings. It is from the world in ruins kickstarter set. It is intended for a “Saving Privat Rian” setting, but I think it works for Hue too.
Many more pictures at https://wargamesgazette.com/2021/01/25/a-colonial-style-building-for-my-hue-project/
Here is the next building for my Hue city project. Another 3D printed building from WOW buildings. It is from the world in ruins kickstarter set. It is intended for a “Saving Privat Rian” setting, but I think it works for Hue too.
Many more pictures at https://wargamesgazette.com/2021/01/25/a-colonial-style-building-for-my-hue-project/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
I thought that a small train station for my Hue project would be nice. There is a complete Hue train station in the WOW Vietnam kickstarter but for me it is just too big. So I started with some tracks and a Diesel engine from another WOW kickstarter.
Many more pictures and a how to about the rust effect here: https://wargamesgazette.com/2021/01/28/a-diesel-engine-for-my-train-layout/
Many more pictures and a how to about the rust effect here: https://wargamesgazette.com/2021/01/28/a-diesel-engine-for-my-train-layout/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Garryowen- Legacy Member
- Location : Ohio
Posts : 1230
Join date : 2020-05-01
Re: Tomrommel1's Vietnam War project
Thanks Tom!
And after a longer hiatus here is the next miniature. A NVA NCO blowing a whistle.
More at https://wargamesgazette.com/2021/02/08/nva-company-command-section/
And after a longer hiatus here is the next miniature. A NVA NCO blowing a whistle.
More at https://wargamesgazette.com/2021/02/08/nva-company-command-section/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
FlyinSquirrel- Legacy Member
- Location : Fort Worth, Texas
Posts : 901
Join date : 2020-05-03
Age : 53
Re: Tomrommel1's Vietnam War project
The next member of the company command. Armed with a salvaged blooper gun. He is wearing a camouflage cape fashioned from a US parachute.
More at https://wargamesgazette.com/2021/02/09/nva-with-liberated-blooper-gun/
More at https://wargamesgazette.com/2021/02/09/nva-with-liberated-blooper-gun/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
Here is the signals NCO of the company command I am building and painting. The flag is freehand, not my best..
More at https://wargamesgazette.com/2021/02/10/the-company-command-trumpeter/
More at https://wargamesgazette.com/2021/02/10/the-company-command-trumpeter/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Garryowen- Legacy Member
- Location : Ohio
Posts : 1230
Join date : 2020-05-01
Re: Tomrommel1's Vietnam War project
Here is the completed company command squad for my NVA army. A really nice pack of figures from Empress Miniatures full of character .
The last missing figure, my company commander .
More at https://wargamesgazette.com/2021/02/11/the-complete-company-command-squad/
The last missing figure, my company commander .
More at https://wargamesgazette.com/2021/02/11/the-complete-company-command-squad/
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
Sorry somehow the forum cut the picture of the complete squad
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Re: Tomrommel1's Vietnam War project
That means the pic is too big. The image needs to be re-sized. I usually re-size mine down to 900 x whatever the width is.
-Todd
Re: Tomrommel1's Vietnam War project
OK so hopefully this isn't to big then
The 60mm mortar by Empress
The 60mm mortar by Empress
Tomrommel1- Senior Member
- Posts : 401
Join date : 2020-05-07
Page 9 of 15 • 1 ... 6 ... 8, 9, 10 ... 15
Similar topics
» Project RIPCORD: A Vietnam Fire Support Base in 1/72 scale
» OTB's Stuff
» 28mm Civilian vehicles project
» Elephants in Vietnam.
» Vietnam Video Game with MACV SOG Vietnam Veterans
» OTB's Stuff
» 28mm Civilian vehicles project
» Elephants in Vietnam.
» Vietnam Video Game with MACV SOG Vietnam Veterans
Page 9 of 15
Permissions in this forum:
You cannot reply to topics in this forum
|
|